Brooks Plumbing Co. Blog: Posts Tagged ‘Plumbing’

Plumber Guide: Plumbing Basics

Wednesday, December 14th, 2011

There are a lot of pipes, drains, fixtures and appliances in your Lacey home carrying out some pretty incredible tasks. For most people, plumbing is just another system that makes their lives easier. But, if something goes wrong, it’s important that you know exactly what to do and for that, you need to know how your system works.

Fundamental Plumbing

Plumbing is based entirely on the properties of gravity and water pressure. A plumbing system has two basic systems – one that brings water in and one that removes that water once you’ve used it. To bring water into your home, it is pressurized. With enough pressure, it can travel against gravity, rising in the pipes to your fixtures.

Every fixture in your home has a valve on it that allows you to shut off the flow of water when making repairs or if there is an emergency. If the emergency is big enough, you can turn the main water supply valve off outside your home as well.

Drainage Systems

While the water coming into your home is relatively simple – pressurized cold water goes directly to the fixtures and hot water comes from your hot water heater – the drainage system is slightly more complicated.

Once water has exited the faucets in your fixtures, it is no longer pressurized so gravity is needed to remove it. Each drain consists of a few basic parts – the flange, tail piece, trap, and drain extension. When you put water down a drain it goes into the trap and flows into the drain extension, eventually to the sewer line.

The trap is designed to always hold a small amount of water so that sewer gasses cannot back up into your fixtures. Vents are installed in your home as well to ensure there is always air in the plumbing system. That air ensures a vacuum doesn’t generate. If it did, water couldn’t flow out of the house. It’s the same as pouring from a small hole in a can – if you poke a hole in the opposite side, it flows much faster because air enters the can to displace the liquid.

Fixing Your Problems

A plumbing system is surprisingly simple to work on if you understand the basics. But, that doesn’t mean a plumber isn’t needed for most major jobs. Because a single fixture or pipe can have an impact on the entire system and because water leakage can be incredibly damaging, it is best to call a professional whenever you need a second opinion or are unsure you can handle it on your own.

Continue Reading

How to Install a Toilet

Wednesday, November 23rd, 2011

A toilet is a relatively basic piece of plumbing equipment, but that does not mean that installing it is easy. This is certainly a job that many people can do on their own, without the help of a Lacey plumber,  but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other. And if you have any questions, talk to your Lacey plumber.

Continue Reading

How to Prevent Bathroom Water Damage: A Guide

Friday, November 18th, 2011

Water damage. Even the mere mention of potential damage from excess water your Olympia house is enough to send a chill down your spine. However, there are a number of things you can do to avoid such damage, especially in the bathroom.

The Bathtub

The biggest single contributors to water damage are the shower and bathtub, where gallons upon gallons of water are distributed every day. You can minimize damage by doing the following:

  • Tiles – Check for missing or cracked tiles and replace them immediately. Supplement the tiles with grout that is properly sealed and check for any potential leaks.
  • Keep it Dry – There is a lot of water in your bathroom. Keep it off the floor by drying it up after a shower, hair washing or any other moisture producing activity in the bathroom. Make sure you minimize the risk of excess water by placing bathmats on the floor outside your shower.
  • Exhaust Fan – Water builds up in a bathroom because there is no moving air. Humidity can be just as damaging as actual wetness, especially if it settles in cooler temperatures. To avoid this happening, install an exhaust fan attached to the light switch to draw out any moisture after a shower.

Sinks and Fixtures

  • Check Under the Sink – Look under the sink and make sure there are no drips from the faucet and no leaks from the trap. You may simply need to check and clean the trap once every month or so.
  • Seals – Check sink seals on a regular basis for cracks or leaks and replace them when necessary.
  • Speed of Drainage – If the sink drains slowly, the drain may be clogged. Check the trap and if that doesn’t help, pour a mixture of vinegar and baking soda down weekly.
  • Upgrades – Upgrade your fixtures to save water. Toilets eat water to the tune of 40% of your annual consumption and your shower head can be made almost twice as efficient without cutting into your comfort level. If you notice a drip, crack or leak from any of these devices, simply upgrade them and you’ll save a lot of water (and reduce how much of it could leak if a problem occurs in the future).

There are a lot of ways to avoid water leaks in your bathroom. Keep a close eye on things and it will be much easier than if you waited for a full blown problem to develop.

Continue Reading

Check Out Our Blog for the Latest in Plumbing Technology

Tuesday, November 8th, 2011

Be sure to bookmark the Brooks Plumbing Co. blog for updates on the latest advances in Plumbing technology.

We’ll feature money saving promotions here as well.

Call Brooks Plumbing Co. for all your Plumbing, Water Heater, Drain & Sewer, and Commercial Plumbing needs.

Continue Reading