Brooks Plumbing Co. Blog: Posts Tagged ‘Plumbing’

Plumbing Question: What is Commerical Plumbing?

Tuesday, September 4th, 2012

If you own a commercial building in the area and need an Olympia plumber to visit and perform part or all of an inspection on your pipes and fixtures, it is important that you hire someone with specific experience working on commercial systems. There are a number of reasons for this, not the least of which is that commercial systems are significantly different from residential systems and therefore need a different kind of attention than the systems you would find in a typical home.

 Larger Scale

A commercial plumbing system works on a much larger scale meaning many more things need to be taken into consideration. In a residential setting, water flow, water pressure, and even construction materials used are generally the same from one home to the next. In a commercial setting, you’re going to find that the type of pipe material present, the layout of those pipes and much more will depend almost entirely on the function of the building being serviced and the type of plumbing that is used.

Certain buildings have special water needs and others must follow particular sanitation guidelines because of what is done there. It is important that you hire a plumber who knows these guidelines and can meet them on the scale that is required.

 Quick and Efficient Service

A commercial plumber in Olympia must be able to quickly and effectively make repairs and service your plumbing system – something that may need to be done during off hours or that will require special equipment due to the larger configuration of your plumbing system. Ideally, they will also have training in those particular configurations and with those specific commercial tools.

It is important to hire a commercial plumber for all of your building’s plumbing needs, whether that means finding someone to perform a routine pipe inspection or to replace large lengths of pipe. If you’re interested in making this a part of your routine maintenance, call Brooks Plumbing Co. today.

Continue Reading

Tags: , , ,
Posted in Plumbing | Comments Off on Plumbing Question: What is Commerical Plumbing?

Plumbing Tip: When to Call for a Garbage Disposal Repair

Monday, August 27th, 2012

Normally when something goes wrong with you Lacey home’s garbage disposal it is quite obvious .  Any if you notice any of the following problems, it can be an indication that a call for garbage disposal repair is needed in order to get it back up and in working order.

  • Bad Smells:  When a bad smell happens, it is great to try the easy fixes like putting lemons down the disposal.  However, when those home remedies don’t really do the trick, it’s likely a garbage disposal problem exists under the surface, such as the unit not properly chopping food any longer.
  • Jammed Disposal:  When a disposal jams on something, it is often an item that should never have gone down the drain in the first place.  The force of the disposal stopping abruptly during use while the motor continues to grind on can cause damage that you could never see and which should be addressed by a trained professional.
  • Water Leaks:  When water leaks from a disposal it can either be a broken seal near where the top of the disposal connects to the sink, or it could be a malfunction within the disposal that requires a repair or replacement.
  • Noisy Disposal:  When there is more than normal vibration or humming coming from the unit, it could be a stuck flywheel, or a locked u p or broken motor.  If this noise continues for too long it could permanently damage the disposal, causing need for a replacement.
  • Clogged Drain:  A drain clog below the disposal could mean that the disposal is no longer properly grinding up food.  If simple fixes such as sharpening the blades with a few cups of ice cubes doesn’t work, then there could be a broken blade or something more causing the disposal not to work.
  • Stops Working Altogether:  When your disposal won’t start and pushing the reset button doesn’t fix the issue, there could be an electrical problem, or a problem with the motor itself.

Hiring a qualified Lacey plumber such as those at Brooks Plumbing  will ensure you get the garbage disposal repair you need quickly and professionally.  Contact Brooks Plumbing today!

Continue Reading

Tags: , , ,
Posted in Plumbing | Comments Off on Plumbing Tip: When to Call for a Garbage Disposal Repair

Plumbing Tip: Reduced Water Flow from Showerheads

Monday, August 20th, 2012

If your showerhead or other plumbing fixtures suddenly have reduced water flow, call the Olympia plumbing experts at Brooks Plumbing to take a look at your showerhead and provide the right solutions.

Causes of Reduced Water Flow

When reduced water flow occurs throughout a home, it can indicate that a serious plumbing problem has sprung up which needs to be addressed quickly.  However, if water pressure remains normal throughout your home, and there’s only reduced water pressure in the showerhead itself, it is usually due to one of a few simple causes. The two main causes are lime-scale build-up or a clogged water screen.

  • Lime-Scale Build-Up:  There could be an accumulation of lime-scale, which is actually calcium, a by-product of hard water.  Vinegar is a simple cleaning substance that can take care of most blockages due to calcium build-up.  Specific calcium cleaning agents can also be purchased at the store, but avoid using harsh chemicals, as they can damage the showerhead.
  • Clogged Water Screen:  There could also be a build-up of gravel or other substances in the water screen within the faucet head.  In this instance the showerhead would need to be removed.  The screen should be able to be cleaned and all debris removed so that water flows freely once again, but if the screen is no longer usable even after cleaning, it may be time to replace the screen or for a showerhead replacement.
  • Showerhead Pipe Problems:  If cleaning off calcium build-up and removing clogs from the water screen to not help the low pressure problem, there is likely something wrong with the pipes leading to the showerhead.  In this case, call an experienced plumber to properly diagnose and resolve the problem.

Brooks Plumbing has a team of experienced Olympia plumbing professionals who can help you out with a wide range of low water flow problems. We also find the best solution to resolve the issue. Contact Brooks Plumbing today!

Continue Reading

Tags: , , ,
Posted in Plumbing | Comments Off on Plumbing Tip: Reduced Water Flow from Showerheads

Plumbing Question: Why Is My Hot Water Heater Not Heating Water?

Monday, August 13th, 2012

Hot water heaters that stop working can affect an entire home.  Not only do water heater problems create cold showers, but they lessen the effectiveness of doing simple tasks such as laundry.  The Olympia plumbing specialists at Brooks Plumbing understand the most common water heater problems and can not only help you understand them but provide quick and easy water heater repairs.

Common Water Heater Problems: When the Water Heater Is Not Heating Water

  • Tripped Circuit Breaker or Blown Fuse: If the circuit breaker has been tripped or blown to the circuit that gives power to the water heater, the water heater will not work.  If there are any blown fuses this will also cause water heater to not heat water.
  • Pilot Light Problems:  If the pilot light goes out, it will cause the water in a water heater to not heat properly.  Because it is a gas appliance it will need to be lit again by a trained professional.
  • Bad Thermocouple:  A faulty thermocouple or other gas control can mean that it fails to open the pilot control valve which would result in no water heating.
  • Faulty Thermostat: If a thermostat doesn’t work properly it will not sense the temperature well and will result in water not being heated to acceptable temperatures.
  • Sediment Buildup in the Water Tank:  If too much sediment has built up inside the water tank, the water will not heat properly.  With proper water heater maintenance any sediment buildup will be addressed by the water heater technician who does the inspection.
  • Water Leaks:  Plumbing connections that are not tight can cause water leaks.  If the water tank itself is leaking it is possible that the entire tank needs to be repaired or replaced professionally.

All of these common water heater problems can be fixed by the Olympia water heater service professionals at Brooks Plumbing. Call us today!

Continue Reading

Tags: , , ,
Posted in Plumbing, Water Heaters | Comments Off on Plumbing Question: Why Is My Hot Water Heater Not Heating Water?

Plumber’s Guide: Slab Leaks and the Damage They Cause

Monday, August 6th, 2012

If you are a Lacey homeowner and you don’t know what a slab leak is, consider yourself lucky. There are few problems that your home can suffer from that are more inconvenient and worrisome than a slab leak. At Brooks Plumbing we believe that the best way for homeowners to be prepared for problems is to keep themselves informed. With that in mind, here is some information about slab leaks and the potential damage they can inflict on your home.

Slab leaks are extremely problematic due to the fact that they are notoriously difficult to detect. They occur beneath the concrete foundation of your home and can cause serious structural damage. Because of their location beneath your home you will not see a slab leak, but there are some warning signs that you can look for to identify a slab leak. Indicators include:

  • Unexplained spikes in your water bill
  • Unusually low water pressure
  • Sounds of running water with no identifiable source
  • Dampness in carpeting or water stains at base of walls

If you are experiencing any of these problems it is important that you contact a professional plumber immediately. By the time you suspect a slab leak it may have been there for some time, and the damage it can cause will only get worse. Slab leaks can occur in your sewer line or potable water line. The potable water line can cause even more damage as the water is pressurized.

Because this type of leak occurs beneath concrete is important to pinpoint the location before any work is performed. You don’t want to tear up the entire floor of your home to find the source of your leak. A professional Lacey plumber will utilize special equipment as well as their training and experience to make the repair process as painless as possible. If you have any reason to suspect a slab leak in your Olympia area home, call Brooks Plumbing Company immediately. We’ll do everything possible to ensure that the structural integrity of your home is not compromised by the slab leak.

Continue Reading

Tags: , ,
Posted in Plumbing | Comments Off on Plumber’s Guide: Slab Leaks and the Damage They Cause

Plumbing Question: What Causes Low Water Pressure?

Monday, July 16th, 2012

Low water pressure in your Olympia home can make just about everything from showering to cleaning more difficult. It is frustrating, but it often seems like there is very little you can do about it. In fact, you may be able to improve your water pressure in a variety of ways, but the appropriate technique will depend on the root cause of your problem.

There are several different possible causes for low water pressure. If the problem is limited to certain areas or fixtures in the house, it may very well be because the pipes feeding that area or fixture are too small. Smaller pipes will only allow a smaller amount of water to pass through at once, making it impossible for you to get the force you are after.

Fixing this, of course, means putting in larger pipes, and that may be easier said than done. However, if the problem is on a small scale, you should not have too much trouble or need to pay too much to have a Olympia plumbing professional complete the job. A problem in a particular fixture can also result from small clogs or backups in the fixture itself, and this is a relatively easy situation to remedy as well.

A low water pressure problem that affects your whole house can result if the main pipes feeding into your house are too small. This could be the case if your house has been added onto since it was built or if you have more people living there now and using more water.

Replacing those incoming pipes is a big job, but it is often the only way to increase your water pressure and make it possible for the system to satisfy the water needs of the house. This is definitely something you will want to have a professional work on, and while it can be costly, it will be well worth it in the end. For more tips on how to improve your Olympia plumbing, give Brooks Plumbing a call!

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Plumbing Question: What Causes Low Water Pressure?

How to Lower Energy Costs for Your Home: Water Heater Tips

Monday, July 2nd, 2012

If you want to lower the energy costs for your Lacey home, the water heater might not be the first place you’d think to save energy. However, when you add up the savings from a few easy steps that can improve your water heater’s efficiency, it can make a significant difference in your utility bills.

Here are some of the ways you can reduce the use of hot water in the home and increase your energy savings.

Saving Energy by Using Less Hot Water

Even if you own an energy-efficient, tankless water heater, and you try to conserve water as much as possible, hot water usage can always be reduced in other areas. Installing low flow faucets and fixtures can provide up to 60% in water savings because they reduce the flow rate (gallons per minute) for each fixture. Tankless water heaters are also more efficient when they are used with any application with a lower flow rate.

Replacing older appliances that require a lot of hot water with more energy-efficient models is worth the money and effort because of the energy savings you will get in the end. Make sure you fix any leaks on older hot water faucet or fixtures. A leak that costs a dollar or two extra per month doesn’t seem like much, but it will add up over time.

Lower the Temperature on Your Hot Water Heater

For every 10°F that you lower the water temperature on your hot water heater, you save between 3% to 5% in energy costs. The manufactured setting for most water heaters is 140°F, but most homes only require a maximum temperature of 120°F. Check your owner’s manual before you lower the temperature on your water heater to find out what the recommended settings are and how to change them.

Insulate Your Water Heater Tank and Water Pipes

Whether you have a gas or electric hot water heater, you can find fairly inexpensive and easy-to-install insulators or “jackets” for your water heater tank. Every tank has an R-value that determines how much heat it loses, so unless it is a high value, your water heater tank needs insulation. Call a Lacey plumber or check your owner’s manual for the R-value of your hot water heater, but the general rule is that if the tank is warm when you touch it, you need more insulation.

You can reduce emissions and your energy costs simply by paying more attention to how much hot water you are using in your Lacey home. For more tips and expert advice, call Brooks Plumbing Co to speak with one of our technicians.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on How to Lower Energy Costs for Your Home: Water Heater Tips

Plumber’s Tip: Bathtub Drain Clogs

Wednesday, January 11th, 2012

When we think of clogged drains and plumbing problems, we most frequently think of toilets and kitchen sinks, but one of the most common drains to cause problems your Tumwater home is probably the bathtub. To avoid drain problems and to help fix any problems that might crop up, here are some tips for how to handle your finicky bathtub drain.

  • How the Bathtub Drain Works – A bathtub drain works the same as the other drains in your home with a simple trap that ensures the safe transfer of water out of your home and blockage of sewer gasses from getting into your home. The drain itself is frequently open with a small crack – roughly a quarter inch – beneath a larger drain plug that can be lowered when you fill the tub. While the space is not large enough for objects like a bar of soap to enter, it is plenty large enough for hair, soap scum, and other small objects from a bath or shower to enter and start clogging that trap.
  • Cleaning the Drain – To cut down on how much hair and gunk actually gets into the drain you should take off the entire drain mechanism once a week and remove any excess hair. You should also use some form of wire device like a bent coat hanger or scrubber to reach in and remove any hair you can reach. There are specific plumbing devices to help with this as well, but a hanger works just fine assuming you do not have a heavy clog. It is also a good idea to run boiling water through your drain once every week to clear out any soap and hair build up. While most soap is water soluble, it can create a thick, greasy clog when combined with hair. Hot water can help to remove it before a clog occurs.
  • If a Clog Occurs – If a clog does occur, you should use the hot water method along with a plunger to try and clear out as much of the clog as possible. Avoid chemical use at all costs. Bathrooms are usually small rooms and even with the fan on, the fumes can be dangerous and the chemicals caustic on your pipes and tub. Baking soda and vinegar often help for small clogs, but otherwise, you should move on to a snake for physical clog removal.

If you have a clog deeper than the snake can reach or that you simply cannot affect with the tools listed above, it may be necessary to call a Tumwater professional who can track your clog into the pipes and find where the root of the problem is. It might be just too deep in your drainage pipe or it could be a completely different area of your plumbing system.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Plumber’s Tip: Bathtub Drain Clogs

Plumber’s Guide: Quick Tips on Toilets

Wednesday, January 4th, 2012

Quite simply, everyone needs to have a working toilet in their Olympia home. Of course, when we do, we tend to take it for granted. Most people really do not know much about how their toilets work and how much water they use, and acquiring that information can be beneficial to you for several reasons. Toilet tips can help you save money, catch problems early and generally get the most out of your toilet.

Water-saving devices are always useful on toilets. Even if you did not buy a water-saver toilet to begin with, you can convert your regular toilet into one by installing a toilet cycle diverter. These great gadgets actually direct some of the water from each flush back into the tank rather than allowing it to run into the toilet bowl itself.

What this does is allow the tank to fill up faster. Less water goes down with each flush and less water is needed to fill up the tank. These devices are relatively easy to install yourself and they can save you a ton in the long run. In fact, the average toilet cycle diverter can conserve up to a gallon of water per flush.

You will also benefit from learning about how your toilet works because it can enable you to catch problems early when they are easy to correct. You may or may not be able to do the corrective work yourself, but at least you can call out an Olympia plumber earlier rather than later.

Fixing toilet problems early hopefully means that you will not have to go without a toilet for very long, if at all. And the repairs that you need should be relatively minor and inexpensive. When toilet issues are allowed to persist, they can turn into a much bigger plumbing problem and cause a great deal of inconvenience to you and your family.

One of the most common toilet problems is leaks. A leaky toilet can have all kinds of symptoms, but the bottom line is that it is probably costing you money on your water bill each month. Also, leaks will only get bigger as time goes on, so you will be much better off if you fix them early. Phantom flushing and continuous running are both signs that your toilet is leaking, and the earlier you do something about it, the better off you will be.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Plumber’s Guide: Quick Tips on Toilets

Plumbing Repair Guide: How to Unclog a Floor Drain

Wednesday, December 28th, 2011

It is never fun to wander down into your Lacey home’s basement only to find that your floor drain has backed up. This is not a situation that will take care of itself and you want to get it under control as quickly as possible. While there are certainly plenty of things you can do to try and unclog a floor drain on your own, there are quite a few potentially complicating factors to consider as well.

First of all, you should make sure that no one in the house turns on any running water for anything until the drain has been unclogged. The floor drain in your basement is usually the last stop on the line for all of the water used in your house, and so any running water anywhere above will only cause more water to back up in the basement. Of course, if you cannot use any running water anywhere else in your house, it is even more imperative that you are able to unclog the floor drain quickly.

If you happen to have a snake on hand, this may be the best option to try first. However, it can be a bit difficult to get the snake to make the sharp turn typical of these types of drains not long after the pipe descends below the floor. That is not to say that it cannot be done, but you should be aware that you need to make sure the snake turns the corner before it will be useful to you at all.

If you do not have a snake of your own, you may still be able to take care of the blockage without calling in a professional plumber. But first you have to find it. Depending on the layout of your drainage system, this may be easier said than done. You can also make a pretty big mess if you open up various sections of pipe looking for the blockage, so be aware and make sure you have something in place to catch the runoff and debris that may come out of the pipes when you open them.

You may also run into trouble if the blockage is actually outside of your house in the larger sewer line that runs to the street. Unclogging a drain with this type of problem is generally a job for a professional and there is very little you will be able to do on your own.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Plumbing Repair Guide: How to Unclog a Floor Drain