Brooks Plumbing Co. Blog: Archive for the ‘Services’ Category

Plumber’s Guide: Quick Tips on Toilets

Wednesday, January 4th, 2012

Quite simply, everyone needs to have a working toilet in their Olympia home. Of course, when we do, we tend to take it for granted. Most people really do not know much about how their toilets work and how much water they use, and acquiring that information can be beneficial to you for several reasons. Toilet tips can help you save money, catch problems early and generally get the most out of your toilet.

Water-saving devices are always useful on toilets. Even if you did not buy a water-saver toilet to begin with, you can convert your regular toilet into one by installing a toilet cycle diverter. These great gadgets actually direct some of the water from each flush back into the tank rather than allowing it to run into the toilet bowl itself.

What this does is allow the tank to fill up faster. Less water goes down with each flush and less water is needed to fill up the tank. These devices are relatively easy to install yourself and they can save you a ton in the long run. In fact, the average toilet cycle diverter can conserve up to a gallon of water per flush.

You will also benefit from learning about how your toilet works because it can enable you to catch problems early when they are easy to correct. You may or may not be able to do the corrective work yourself, but at least you can call out an Olympia plumber earlier rather than later.

Fixing toilet problems early hopefully means that you will not have to go without a toilet for very long, if at all. And the repairs that you need should be relatively minor and inexpensive. When toilet issues are allowed to persist, they can turn into a much bigger plumbing problem and cause a great deal of inconvenience to you and your family.

One of the most common toilet problems is leaks. A leaky toilet can have all kinds of symptoms, but the bottom line is that it is probably costing you money on your water bill each month. Also, leaks will only get bigger as time goes on, so you will be much better off if you fix them early. Phantom flushing and continuous running are both signs that your toilet is leaking, and the earlier you do something about it, the better off you will be.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Plumber’s Guide: Quick Tips on Toilets

Happy New Year’s Eve from Your Plumber!

Saturday, December 31st, 2011

Everyone here wishes you a Happy New Year! New Year’s is one of the best times to reflect on all the good things that have happened this year and make plans for the next. We hope that you are able to achieve all of your resolutions! If one of your resolutions is to take better are of your house, remember that annual maintenance of your plumbing system will keep it running as effectively as possible and cut down on emergency repairs. And here is some New Year’s trivia to start your day: the first Time Square New Year’s Eve ball was dropped in 1907 after fireworks were banned in New York City. Today’s ball weighs nearly 12 thousand pounds and is 12 feet in diameter!

Continue Reading

Tags:
Posted in Services | Comments Off on Happy New Year’s Eve from Your Plumber!

Plumbing Repair Guide: How to Unclog a Floor Drain

Wednesday, December 28th, 2011

It is never fun to wander down into your Lacey home’s basement only to find that your floor drain has backed up. This is not a situation that will take care of itself and you want to get it under control as quickly as possible. While there are certainly plenty of things you can do to try and unclog a floor drain on your own, there are quite a few potentially complicating factors to consider as well.

First of all, you should make sure that no one in the house turns on any running water for anything until the drain has been unclogged. The floor drain in your basement is usually the last stop on the line for all of the water used in your house, and so any running water anywhere above will only cause more water to back up in the basement. Of course, if you cannot use any running water anywhere else in your house, it is even more imperative that you are able to unclog the floor drain quickly.

If you happen to have a snake on hand, this may be the best option to try first. However, it can be a bit difficult to get the snake to make the sharp turn typical of these types of drains not long after the pipe descends below the floor. That is not to say that it cannot be done, but you should be aware that you need to make sure the snake turns the corner before it will be useful to you at all.

If you do not have a snake of your own, you may still be able to take care of the blockage without calling in a professional plumber. But first you have to find it. Depending on the layout of your drainage system, this may be easier said than done. You can also make a pretty big mess if you open up various sections of pipe looking for the blockage, so be aware and make sure you have something in place to catch the runoff and debris that may come out of the pipes when you open them.

You may also run into trouble if the blockage is actually outside of your house in the larger sewer line that runs to the street. Unclogging a drain with this type of problem is generally a job for a professional and there is very little you will be able to do on your own.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Plumbing Repair Guide: How to Unclog a Floor Drain

Happy Holidays from Your Plumber!

Wednesday, December 21st, 2011

Everyone at Brooks Plumbing Co. wishes you a very Happy Holiday! We hope you enjoy this time with friends, family and loved ones. Stay safe and warm this season! Also remember that whether its you water heater or your plumbing system, regular maintenance will keep your equipment working and cut down on repairs.

The holidays are a time to celebrate, and one of the best things about them is the great food. Here is a little treat we found that will make any day even better:

Gingersnap Cookies

“This melt-in-your-mouth ginger cookie recipe that I received from my grandmother has been enjoyed in my family since 1899.”

INGREDIENTS:

2 cups sifted all-purpose flour

1 tablespoon ground ginger

2 teaspoons baking soda

1 teaspoon ground cinnamon

1/2 teaspoon salt

3/4 cup shortening

1 cup white sugar

1 egg

1/4 cup dark molasses

1/3 cup cinnamon sugar

DIRECTIONS:

  1. Preheat oven to 350 degrees F (175 degrees C).
  2. Sift the flour, ginger, baking soda, cinnamon, and salt into a mixing bowl. Stir the mixture to blend evenly, and sift a second time into another bowl.
  3. Place the shortening into a mixing bowl and beat until creamy. Gradually beat in the white sugar. Beat in the egg, and dark molasses. Sift 1/3 of the flour mixture into the shortening mixture; stir to thoroughly blend. Sift in the remaining flour mixture, and mix together until a soft dough forms. Pinch off small amounts of dough and roll into 1 inch diameter balls between your hands. Roll each ball in cinnamon sugar, and place 2 inches apart on an ungreased baking sheet.
  4. Bake in preheated oven until the tops are rounded and slightly cracked, about 10 minutes. Cool cookies on a wire rack. Store in an air tight container.

For more details, visit allrecipes.com

Continue Reading

Tags:
Posted in Services | Comments Off on Happy Holidays from Your Plumber!

Plumber Guide: Plumbing Basics

Wednesday, December 14th, 2011

There are a lot of pipes, drains, fixtures and appliances in your Lacey home carrying out some pretty incredible tasks. For most people, plumbing is just another system that makes their lives easier. But, if something goes wrong, it’s important that you know exactly what to do and for that, you need to know how your system works.

Fundamental Plumbing

Plumbing is based entirely on the properties of gravity and water pressure. A plumbing system has two basic systems – one that brings water in and one that removes that water once you’ve used it. To bring water into your home, it is pressurized. With enough pressure, it can travel against gravity, rising in the pipes to your fixtures.

Every fixture in your home has a valve on it that allows you to shut off the flow of water when making repairs or if there is an emergency. If the emergency is big enough, you can turn the main water supply valve off outside your home as well.

Drainage Systems

While the water coming into your home is relatively simple – pressurized cold water goes directly to the fixtures and hot water comes from your hot water heater – the drainage system is slightly more complicated.

Once water has exited the faucets in your fixtures, it is no longer pressurized so gravity is needed to remove it. Each drain consists of a few basic parts – the flange, tail piece, trap, and drain extension. When you put water down a drain it goes into the trap and flows into the drain extension, eventually to the sewer line.

The trap is designed to always hold a small amount of water so that sewer gasses cannot back up into your fixtures. Vents are installed in your home as well to ensure there is always air in the plumbing system. That air ensures a vacuum doesn’t generate. If it did, water couldn’t flow out of the house. It’s the same as pouring from a small hole in a can – if you poke a hole in the opposite side, it flows much faster because air enters the can to displace the liquid.

Fixing Your Problems

A plumbing system is surprisingly simple to work on if you understand the basics. But, that doesn’t mean a plumber isn’t needed for most major jobs. Because a single fixture or pipe can have an impact on the entire system and because water leakage can be incredibly damaging, it is best to call a professional whenever you need a second opinion or are unsure you can handle it on your own.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Plumber Guide: Plumbing Basics

Plumber Tip: Common Plumbing Tools and Their Uses

Wednesday, December 7th, 2011

Every contractor has his tool chest, and an Olympia plumber is no different. To the novice eye, some of these tools may seem alien and complicated, but in fact the most common tools are quite simple to use. They are specialized to the job they perform, but they are all in all pretty simple.

Below are some descriptions of the most common plumbing tools and their uses.

When many people think of plumbing tools, they think of that big orange iron wrench that plumbers on TV and in cartoons always carry around. That is a pipe wrench, which is a powerful adjustable wrench specifically designed to loosen and tighten plumbing fixtures like pipes. (Hence the name.)

Perhaps the most common plumber tool that people already have on hand is the versatile plunger, which is a lifesaver for clearing up most simple clogs. For stubborn clogs, a pipe snake can come in handy. Essentially a snake is just a length of sturdy but flexible metal or plastic with a spring on the end for snaring clogs, like bundles of hair or debris.

For tighter spaces, there is a basin wrench, which is specially designed to loosen and tighten connections under sinks and basins. A pipe wrench usually cannot reach these spots, so a basin wrench is called for in these situations.

For the tricky nuts, or spots where neither a pipe wrench nor basin wrench will do, a pair of slip-joint pliers is a necessity for plumbers. These pliers are adjustable and have sturdy teeth for gripping hexagonal nuts, such as those attaching a toilet to the flange in your bathroom.

While a professional plumber will have a much more comprehensive selection available to him, these pieces make a good starting toolkit for tackling most common DIY plumbing repairs and other jobs around the house.

Generally speaking, if you have a plumbing need that can’t be met with these tools and your know-how, it’s probably time to call a real plumber and avoid any mounting headaches or damage.

Continue Reading

Tags: ,
Posted in Services | Comments Off on Plumber Tip: Common Plumbing Tools and Their Uses

Emergency Plumbing Tips

Wednesday, November 30th, 2011

When you have a plumbing emergency in your Tumwater home, the last thing you want to do is make the problem worse, but if you don’t act fast, that’s exactly what might happen. To help you take the right actions and avoid the wrong ones, here are some quick tips for how to handle a plumbing emergency.

  • Shutting Off the Water – If a pipe bursts or you have standing water somewhere, the very first step you take is to shut off the water. Cleanup is pointless if more water pours in. So, we need to stop the flow. Usually, this water valve is located outside, but it can be found under an access panel or in the basement in some cases.
  • Flooding Toilet – Watching the water slowly rise in a toilet, dangerously close to the rim, can be scary. But, there are tricks to slow or stop the flow until the plumber arrives. The first is to turn on your sink faucet to slow down the water flow to the toilet. If you can reach it, turn off the cold water supply to your toilet as well. As soon as the tank is empty, no new water will enter.
  • Turning Off an Appliance – Sometimes the problem isn’t a house-wide problem but a specific appliance overflowing. If your washing machine or dishwasher is about to overflow, turn off the supply valve immediately. It could be several gallons of water per minute if you don’t.
  • When Electricity is Involved – If your basement floods, don’t go down there until you can be sure there is no electricity flowing into the water. That much water with live electricity is incredibly dangerous. If you can’t be sure, get a plumber out there fast.
  • Gas Leaks – Sometimes, a plumbing problem is really a gas problem. If this is the case, don’t try to fix it yourself. Get everyone out of the house and call the gas company immediately.
  • Hot Water Leakage – If you notice that hot water is leaking somewhere in your home, turn off the main water supply and then turn off the hot water heater’s energy source. There should be an emergency shutoff valve on the hot water heater for gas and a switch on the device if it is electric.

In each of these cases, the very next step you take should be to call a plumber, but if you act fast you can hopefully mitigate the damage.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Emergency Plumbing Tips

Happy Thanksgiving!

Thursday, November 24th, 2011

Happy Thanksgiving! We are very thankful for all of our customers; you really make what we do worthwhile. We hope you all have a great holiday and enjoy a delicious Thanksgiving feast! And if you are looking for some dessert ideas, here is a recipe for pumpkin pie from allrecipes.com that will make today a little sweeter:

Mrs. Sigg’s Fresh Pumpkin Pie

“A mixture of fresh pumpkin puree, brown sugar, spices, evaporated milk and eggs is poured into a prepared pie crust and baked. ”

INGREDIENTS:

  • 1 sugar pumpkin
  • 1 recipe pastry for a 9 inch single crust pie
  • 2 eggs
  • 1 cup packed light brown sugar
  • 1 tablespoon all-purpose flour
  • 1/2 teaspoon salt
  • 2 1/2 teaspoons pumpkin pie spice
  • 1 (12 fluid ounce) can evaporated milk

DIRECTIONS:

  1. Cut pumpkin in half and remove seeds. Place cut side down on a cookie sheet lined with lightly oiled aluminum foil. Bake at 325 degrees F (165 degrees C) for 30 to 40 minutes, or until the flesh is tender when poked with a fork. Cool until just warm. Scrape the pumpkin flesh from the peel. Either mash, or puree in small batches in a blender. Increase oven temperature to 450 degrees F (230 degrees C.)
  2. In a large bowl, slightly beat eggs. Add brown sugar, flour, salt, 2 cups of the pumpkin puree, pumpkin pie spice, and evaporated milk. Stir well after each addition.
  3. Pour mixture into the unbaked pastry shell. Place a strip of aluminum foil around the edge of the crust to prevent over browning.
  4. Bake 10 minutes at 450 degrees F (230 degrees C), then reduce the oven temperature to 350 degrees F (175 degrees C). Bake an additional 40 to 50 minutes, or until a toothpick inserted near the center comes out clean. Remove the strip of foil about 20 minutes before the pie is done so that the edge of the crust will be a light golden brown. Cool pie, and refrigerate overnight for best flavor.

For more details, click here.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Happy Thanksgiving!

How to Install a Toilet

Wednesday, November 23rd, 2011

A toilet is a relatively basic piece of plumbing equipment, but that does not mean that installing it is easy. This is certainly a job that many people can do on their own, without the help of a Lacey plumber,  but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other. And if you have any questions, talk to your Lacey plumber.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on How to Install a Toilet

How to Prevent Bathroom Water Damage: A Guide

Friday, November 18th, 2011

Water damage. Even the mere mention of potential damage from excess water your Olympia house is enough to send a chill down your spine. However, there are a number of things you can do to avoid such damage, especially in the bathroom.

The Bathtub

The biggest single contributors to water damage are the shower and bathtub, where gallons upon gallons of water are distributed every day. You can minimize damage by doing the following:

  • Tiles – Check for missing or cracked tiles and replace them immediately. Supplement the tiles with grout that is properly sealed and check for any potential leaks.
  • Keep it Dry – There is a lot of water in your bathroom. Keep it off the floor by drying it up after a shower, hair washing or any other moisture producing activity in the bathroom. Make sure you minimize the risk of excess water by placing bathmats on the floor outside your shower.
  • Exhaust Fan – Water builds up in a bathroom because there is no moving air. Humidity can be just as damaging as actual wetness, especially if it settles in cooler temperatures. To avoid this happening, install an exhaust fan attached to the light switch to draw out any moisture after a shower.

Sinks and Fixtures

  • Check Under the Sink – Look under the sink and make sure there are no drips from the faucet and no leaks from the trap. You may simply need to check and clean the trap once every month or so.
  • Seals – Check sink seals on a regular basis for cracks or leaks and replace them when necessary.
  • Speed of Drainage – If the sink drains slowly, the drain may be clogged. Check the trap and if that doesn’t help, pour a mixture of vinegar and baking soda down weekly.
  • Upgrades – Upgrade your fixtures to save water. Toilets eat water to the tune of 40% of your annual consumption and your shower head can be made almost twice as efficient without cutting into your comfort level. If you notice a drip, crack or leak from any of these devices, simply upgrade them and you’ll save a lot of water (and reduce how much of it could leak if a problem occurs in the future).

There are a lot of ways to avoid water leaks in your bathroom. Keep a close eye on things and it will be much easier than if you waited for a full blown problem to develop.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on How to Prevent Bathroom Water Damage: A Guide